Home · · Products · · Gallery · · Support Wear· · Orders · · Dealer ·  
Pricing · · History · · Contact · · Instructions · · Specials · · Links ·  
Badlands Electronic Modules LED Turn Signals Taillights Lighting Kits Directional Mirrors Cleaning Products Accessories Billet
Metric Bike Electronic Modules License Plate Frames Digital Mirrors Tank Mount Kits Dressers Risers

License Plate Frames

TILT BACK LIGHTED LICENSE PLATE FRAME

This unique billet license plate frame is illuminated for the custom bike builder who desires to French-in a trick taillight or run a custom taillight without license plate illumination. Milled from 6061 aluminum this chrome unit will add a touch of class to any custom bike. This assembly includes our backing plate, rubber block with hardware, custom light housing and license plate frame with chrome button head and acorn fasteners.

 

PART #:  LLPF-02-C - new for 2009
  Tilt Back Lighted License Plate Frame Assembly/Chrome

PART #:   LPF-01-C
 Tilt Back License Plate Assembly/ Chrome

PART #:   LPF-02-C
 License Plate Frame and Hardware ONLY/ Chrome

FOLD AWAY SIDE MOUNT HINGE & BACKING PLATE LICENSE - New for 2010
 -To use our full system 1st pick out your hinge then scroll down and pick your backing plate.

 

 

 

 

 

Did you know running a Side Mount vertically rather than horizontally is now a ticketable offence?

That's why we never caved in to pressure to build ours in a vertical design, I had heard this was coming.

Here in Nevada a friend just got a $230 ticket and Daytona will be issuing a $1,000 ticket for vertical plates, really ! ! !

 

A common use for this trick little item is to keep passersby from bonking their shins on your custom side mounted license plate. All components are machined from 6061 and 7075 billet aluminum and chrome plated. Three kits available: Softail's, Swing Arm Motorcycles, and a Weld On Tab for custom applications. Combined with any of our backing plates listed and you have one the finest and certainly the most heavy duty side mounted license plate on the market today. Concept by Ron Rupp, manufactured by Badlands.


FOLDING SIDE MOUNT - HINGE ONLY

 

FSM-01-C Fits 1986 thru 1999 Softails with 3/4” axle, left side kit in photo.

FSM-01-A-C Fits 2000 thru 2007 Softails, with 3/4 axle, left side photo also but with thinner mounting bracket as pictured.

FSM-01-B-C Fits late 2007 & 2008 with 1” axle, left side photo also but with thinner mounting bracket & 1" axel hole.

FSM-02-C Swing Arm lower shower shock bolt as pictured in center of photo.

FSM-02-V-ROD Folding Side Mount for V-ROD, mounts also to lower shock bolt but comes with special stud with metric threads on one side.

FSM-03-C Weld on Tab, right side of photo.
FSM-01-C-BC Black Mount / Chrome Hinge
Fits Late 2008 to Present

FSM-01-C-BB Black Mount / Black Hinge
Fits Late 2008 to Present

Badlands has designed a new 1/4" Steel Mount, Heli-Arc Welded to our new axel spacer (See Arrow in photo on Right)  that sits between the Swing Arm & Pulley. This attaches to our Folding Hinge that accepts either our LED Plate Illumination Only Frame, Cat-Eye or Radiantz Oval. See Below.  


 




 

BACKING PLATES FOR FOLDING SIDE MOUNT HINGE
& NEW NON-FOLDING SIDE MOUNTS

For Cat Eye taillight or Arlen Ness Custom Cat Eye. Taillight sold separately, comes with billet license plate frame and chrome fasteners.

PART #:   FBP-01-L-C
Left Hand Side Mount/Chrome
For Black : FBP-01-L-B

For Radiantz Led Oval Taillight with LED license plate illumination. Taillight sold separately, comes with billet license plate frame and chrome button head screw kit.


PART #: FBP-02-L-C
Left Hand Side Mount/Chrome

For Black : FBP-02- L-B


 
Radiantz Super Thin Led Light Bar Led Illumination, comes with Radiantz Super Thin Light Bar Backing plate, billet license plate frame and chrome button head screw kit.


PART #: FBP-04-L-C
Left Hand Side Mount/Chrome

For Black : FBP-04-L-B
 

1928 Ford Taillight Side Mount

    

Our newest Side Mount Backing Plate Assembly comes with this Retro 1928 Ford Taillight. This assembly fits either our Folding Side Mount Hinge or our Non Folding Mount for Swing Arm Bikes. Choose from super bright LED, where both top and bottom sections are illuminated, or an old fashion Incandescent light bulb, where only the bottom does run, and the top portion comes on for brake. Both styles of lights come with license plate illumination window. You can also choose this assembly in chrome or in black finish. Includes backing plate, license plate frame, light and hardware.

FBP-05-C-LED CHROME WITH LED LIGHT

FBP-05-C-STOP CHROME WITH INCANDESCENT LIGHT, "STOP"

FBP-05-B-LED BLACK WITH LED LIGHT

FBP-05-B-STOP BLACK WITH INCANDESCENT LIGHT, "STOP"
BADLANDS NEW NON-FOLDING SIDE MOUNT

FOR NIGHTSTER, DYNA, V-ROD & SWING ARM MOTORCYCLES USING A STANDARD ½” SHOCK BOLT.

 

Not liking the factory side mount thingy on your new Nightster, Dyna or V-Rod? We have designed a mount that attaches to the lower shock bolt. Then the backing plate with led lighting illumination lighting, bolts on and follows the line of the shock, for a clean, tucked in look. Also fits any other model using a ½” shock bolt, for those who desire to relocate their plate frame. also available in 2 other versions which hold a taillight.

NFSM-04-C : FOR V-RODS

NFSM-05-C : FOR NIGHTSTERS, DYNAS / UNIVERSAL SWING ARM WITH A 1/2 BOLT

FITMENT (½” SHOCK BOLT)

For a Black finish, replace the C with B at the end of part number.

Now you have selected your bikes mounting bracket please choose the desired backing plates from above.

 


 

 
Sequential Turn Signal Plate Frame  

Plate frames for 4 x 7 inch plate come in chrome or black. Available with red or yellow sequential or red non-sequential. Also available is white plate light that is hidden in the plate when installed.
Chrome Frames             
Red sequential            
P/N: STSPR              

Yellow sequential     
P/N: STSPY              

Red non-sequential            
P/N: NSTSPR       

Black Frames
Red sequential
P/N: STSPR-B

Yellow sequential
P/N: STSPY-B

Red non-sequential
P/N: NSTSPR-B

Use our Illuminator with non-sequential plate frame and plate light and have run, brake, turn, flashers and plate light all in the plate frame.

New white plate light sold separately, mounts inside frame

 PART #: LPL-2


Click here to View Video
"Whiskers" LED License Plate Frames  

"Whiskers" License Plate Frame with new super bright RADIANTZ LED strip lighting
and redesigned "no see em's" clear lenses.

Chrome Plated, milled from 6061 Billet aluminum assembled with the WHISKERS style lenses and LED lighting in Red, Amber or Red that Turns Amber when the turn signals are activated. With the Red that Turns to Amber, you can have either Run and Turn or Brake and Turn. You can run the Red LED's and our Illuminator for Run, Brake and Turn Signals. Unlike other signals on the market, you can see these RADIANTZ LED's a mile away. Comes with our new "No See Em's" clear lenses that blend into our beautiful chrome plating. Install this Plate frame and keep your signals off the fender struts for that uncluttered look; Or if you are installing Saddle Bags, this will relocate your turn signals to the OEM plate location. - And if you have a Badlands Frame with the old style halogen lights - we offer a LED Retro Fit Kit (below) and you too can benefit from state of the art lighting.
(Fits: 7 1/8" X 4 1/16" License Plates)

PART #:  LTS-01-LA        Amber LED

 PART #:  LTS-02-LA   Amber LED

PART #:  LTS-01-LR             Red LED 

PART #:  LTS-02-LR     Red LED

PART #:  LTS-01-LRA     Red to Amber

 PART #:  LTS-02-LRA    Red to Amber
"WHISKERS" LED RETRO FIT KIT
Halogen bulbs made our turn signals the brightest signals on the market in their day, but LEDs have surpassed the halogen bulb by 3 times in brightness. Now you can retro fit your whiskers license plate frame with the same LED strips from RADIANTZ that we have switched to in our new whiskers license plate frame. Simple to install and unbelievably bright, everything you will need to make the switch is included in this great kit! They come in amber, red or red for running or brake that goes amber with activation of turn signal button. Also comes with our new “no see em's” redesigned clear lenses.

     PART #:  WRLK-A                AMBER 
     PART #:  WRLK-R                RED  
     PART #:  WRLK-R-A            RED TO AMBER   

  
TURN SIGNALS ACCESSORIES  

Compliment your bike with our custom trim plate, backing plate, and tilt back mounting plates that match the contour of your new turn signal assembly. We also offer a hardware kit with the correct size chrome allens and acorns to properly mount your new turn signal assembly.

PART #:  BP-01 Backing Plate/Vertical Lamp
 PART #:  BP-02 Backing Plate/Horizontal Lamp
 PART #:  BP-03 Trim Plate for OEM license plate bracket or bobbed fender
 PART #:  TBM-01 Tilt Back Mount/Vertical Lamp includes backing plate
 PART #:  TBM-02 Tilt Back Mount/Horizontal Lamp includes backing plate
 PART #:  HK-01 Hardware Kit

 

 

 

Web design by
Mike Marcum

Badlands Motorcycle Products ™
1554 Linda Way ▪ Sparks, NV 89431
775-359-4450 Voice  ▪ 775-359-5149 Fax
Copyright © 2001-2011
 Email

Looking to print this page?
Click here for Print Help